Procedure

A strong acid is a compound that dissociates completely in an aqueous solution and produces a concentration of hydronium ions equal to the initial concentration of acid. For example, 0.20 M hydrobromic acid will dissociate completely in water and produces 0.20 M of hydronium ions and 0.20 M of bromide ions.

Eq1

On the other hand, a strong base is a compound that dissociates completely in an aqueous solution and produces hydroxide ions. For example, 0.015 M KOH, a group 1 metal hydroxide, will dissociate completely and produce 0.015 M of OH- and 0.015 M of K+.

Eq2

Group 2 metal hydroxides, like barium hydroxide [Ba(OH)2] and strontium hydroxide [Sr(OH)2], are also strong bases and possess two hydroxide ions. This causes them to produce a more basic solution compared to NaOH or KOH at the same concentration. For example, 0.015 M Ba(OH)produces 0.015 M Baand 0.030 M hydroxide.

Eq3

As strong acids and bases dissociate completely, molar ratios can be used to determine their hydronium and hydroxide concentrations, which in turn can be used to calculate the pH or pOH of a solution. For example, a 0.030 M HCl solution will produce 0.03 M hydronium ions. Therefore the pH of this solution will be

Eq4

The pOH of the same solution can be determined using the formula

Eq5

As the pH of the solution is 1.52, its pOH can be calculated as

Eq6

Similarly, the concentration of hydroxide ions produced by strong bases can be used to determine the pOH of a solution using the equation

Eq7

The above equation can also be used to determine the hydroxide ion concentration when pOH is known. For example, if the pOH of a solution is 3.00,

Eq8

Multiplication of both sides by −1 gives

Eq9

Now, take the antilog of both sides

Eq10

Thus, the hydronium ion concentration of the solution with pOH 3 is 1.0 × 10−3 M. A similar method can be used to determine the hydronium ion concentration of a solution if its pH is known.